Flow Bindings

Posted: Monday, January 31, 2011 by Libby in Labels: ,
41

So, this is my first post and I have decided to do it on flow bindings. I have a lot of personal experience with bindings. I have used clips, straps, and right now i am using flows. As everyone knows, clips just suck. I don't know many people who actually like them except for noobs. I personally do love straps; they are comfortable and you can put them on in all snow types. Still, I am here to talk about flows. I have been using the same ones for about 2 seasons. I do like them, but I do have some problems with them.

1. It takes forever to get them comfortable; and it seems like once you do get them perfect, they stretch or something, so you are constantly adjusting them.
2. Yes they are fast, but any snow in them and you have a problem.
3. they tend to give me bruises on my ankles.... I am not sure if this is common, but I have read a few things about this problem.
4. I have a hard time carving. This doesn't really help on those steep slopes.

Still with all the negatives I have some good things to say about them.

1.They are faster to put on if you are riding with skiers. They will LOVE you!
2. I am with ski patrol, and it helps a lot when you are working with the toboggan.
3. I think they are good for beginners or people who are just riding to have fun, not for working on skills or terrain park riding.

Still this is all opinionated. Some people truly love them and would never use any other binding.
Personally though, I am going back to strap ins. I am done with the bruised ankles and the constant adjustments. Also, fellow snowboarders will give you shit for wearing them, so BUYER BEWARE!

41 comments:

  1. Thor says:

    I picked up a new pair of flow NXT-AT bindings this past fall. The solid aluminum base makes for a much more responsive ride than the nylon composite bases that I've ridden on before. Definitely helps with carving on the icier slopes that we tend to get in the midwest. They also added a cover for the base plate that helps to reduce the snow buildup inside of the bindings.

    The biggest drawback that I always have with them is that its really easy to bump the straps when you're getting off the lift or sliding across a flat and then you have to readjust your bindings when it happens.

    Otherwise though, I really like these bindings. They're really quick to get in and out of whether you're on a flat or on the slopes. I think this is why so many snowboarders on ski patrol tend to favor them. If you do buy them though, its definitely worth spending the extra money to the NXT series.

  1. Anonymous says:

    Yea one of the biggest issues I get like you said is I get hardcore bruises. Almost to the point of scarring. Also clips aren't as bad as you say. True their for "noobs" but weren't we all "noobs" at one point...Look forward to your next article.

  1. Unknown says:

    I was just wondering out of all the 2010 (mens) which 3 Flow Bindings are the best for this year?

    Also Yes Greg I am big noob and need my clips : )

  1. Anonymous says:

    Since I've converted to Flows from strap-ins and am not strap-in biased I will actually answer your question as requested and say that the Top 3 Flow Bindings for your style of riding are 3) NXT FRX, 2) NXT FR, and 1) for your style, which exactly mirrors mind, NXT AT's...they're all terrain but slightly geared more towards park, but work great on the mountain and they are the ones that I use. Lower end flows, yea they have their reputation but judging by my buddies who always go cheap and buy the lower end stuff, they work fine. The main reason why I bought the NXT AT's was because the color scheme, and because I liked how they felt as opposed to the cheaper stuff when I demo'd them. Also they were super light and easy to adjust.

  1. Anonymous says:

    the high end flows like the NXT's are the only ones worth looking at, You can't beat Unions durability tho and their lifetime warranty

  1. Unknown says:

    I've been boarding for 12 years, and I just have never had any luck with flow bindings they cause me more pain the what their worth but that's just my opinion. Don't worry OverkillChaos you won't be a noob forever

  1. Unknown says:

    Wanna bet I won't be a noob forever I go snowboarding once every 5 years I have no hope :P

  1. Unknown says:

    HAHAHAHA Yea sorry bro

  1. Unknown says:

    Okay well ive got some flow bindings and they are screwed in, my bindings are basically straight i forgot which degrees but if i accidentally kick my binding while skating to the chairlift they change the degrees and really mess it up, so is there a way i could fix that? and What degrees should my bindings be at if i am a beginner but i am also learning some tricks like 180's and just jumps and riding switch? Thanks for the help?

  1. Anonymous says:

    I wouldn't use any loctite or thread locker compound..


    Go to Lowe's or Home Depot and buy some Threaded Pipe Tape.. is like 89cents a roll will last for a long time.. it's white and usually in a pink or yellow roll (in the plumbing section)

    wrap the threads on the screws with a piece about an inch long and tighten them down.. it does 2 things..
    1.) prevents the screws from vibrating loose, but still allows you to be able to remove them without wrenching down on the screwdriver.
    2.) prevents water from getting in the threads and rusting them up without worrying about the loctite eating the bindings or siezing up the threads

  1. Unknown says:

    I recommend 15 degrees on the front foot, and -12 degrees on the back foot, vice versa if you're goofy. I think your problem is that you screws aren't tight enough. Put some loctite thread locker on the screws and really crank em' tight. But, be careful because this stuff seriously ***** up plastic and will destroy your discs, but they do keep your screws tight.

  1. Anonymous says:

    now ive been snowboarding for about 8 years now. last year i recently bought flow bindings and i love them. but i need to get new boots cause my old ones are too small. so i was wondering if any boot will fit the binding. i know not every single one will but do most? thanks for the help

  1. Anonymous says:

    mostly, im pretty sure.
    the only thing i would check for is toe drag, with the binding/boot set up on your actual board, if you bring your board to the shop or just like length/width or style of your board im pretty sure the workers will be able to tell you if you'll get toe drag.

  1. Unknown says:

    Bring the bindings with you when you try on new boots. For example a large binding goes up to 11.5 boot so if you are going to a size 12 it may not fit... But if you are staying within the bindings size range it should be fine

  1. Anonymous says:

    Flow bindings have different sized binding bases and two different sized foot straps.

    You should be able to get a different sized foot strap and avoid buying new boots. That is unless you needed new boots anyway.

  1. Unknown says:

    hmmmmmmmmmmmmmm Yes. but may need to adjust the straps on the bindings to fit the boot. Che k for toe drag and If there is then tilt your bindings outward

  1. Anonymous says:

    I have flow bindings now but never really experienced strap in bindings and i would like to know if i am loosing performance from flow binding. I ask the question because my friend always gets on me about using them. he says that i miss out on comfort, light weight, and freedom as far as spins go. if i could get some stats and some reasons why that he is wrong or right that would be very helpful. also if you could throw in a web page to back up your theory's and facts that would be great.

  1. Anonymous says:

    no, flows arent the best in general, fer starters they will always be losser than normal strap in bindings because you cant tighten them as you plaese. but the real park factor comes with the fact that flows come "upoped" easily, in the park world you be taking some pills no matter what, so flows are going to come "unpoped" alot if park is your thing.

  1. Unknown says:

    flow is more for beginners since they aren't doing flips/ spins of hard carves since the flow design looses response, while strap in bindings let you get snug in the binding without any lose of response. the ride EX is very responsive and comfortable and union makes very good bindings since they revolutionized the design by making them lighter and stronger.
    i had flows last year and i liked how easy it was to get in and out but i just lose so much response. people criticized my choice and i knew they were right.

  1. Anonymous says:

    Flow bindings are exceptional for park. All of the new 2011 models have both side and rear entry and have full ratchets up front for the best adjustability in the industry. Top riders like Scotty Lago have made their careers on Flow bindings.

  1. Unknown says:

    Hope Libby makes a new article I got my debating Hat on :P

  1. Anonymous says:

    Same I hope its like over the X games or Snowboarding tricks

  1. Anonymous says:

    Yea Libby We WANT TO ARGUE LOL

  1. Unknown says:

    WOOOOOT GO LIBBY!!!!! EVEN THOUGH I DON'T KNOW HER BUT GOOOOOO LIBBY!!!!!

  1. Unknown says:

    Hahahaha yea she is pretty cool, but she will be making more as the days go on no need to rush : )

  1. Unknown says:

    Chaos is right no need to rush her but we are all looking forward to your next post

  1. Anonymous says:

    Yea can't wait to get the next one Libby hold in their strong girly girl

  1. Unknown says:

    Here's one if you could snowboard down a hill blindfolded would you do it?

  1. Anonymous says:

    Ummmmm Do like dying?

  1. Unknown says:

    Yea if I have trouble on the bunny slope I think going down it blindfolded would help me meet my maker :P

  1. Anonymous says:

    Lol what ever drugs your own bro want to give me some cause yo ass must be high if you'd do that

  1. Unknown says:

    Im gonna have to agree with bones on this one and yea Chaos you would get OWNED LOL jk bro jk jk jk.

    Oh yea Chaos wanted me to say we hope you feel better Libby

  1. Anonymous says:

    Feel better girl you got some bloggin to do

  1. Unknown says:

    Hahahaha that kinda sounded a lil dirty

  1. Unknown says:

    i am going up north on a snowboard trip this weekend and i need a new baseplate for my bindings fast. I have some flow bindings but im not quite sure what model they are. the closest model i could find is the FL-55. if i just got a baseplate from that model would it work for my bindings?

  1. Anonymous says:

    NO.

    Baseplates are very specific. Although they may fit and feel perfect, the teeth do not line up as they should. A pro broke his leg because of this. When he landed, the teeth slipped, and the binding turned around with his foot in it.

    Not to scare you, but it is not worth the risk. Call the manufacturer and have them send you new ones.

  1. Unknown says:

    As the question asks, will Flow NXT-ATSE bindings fit the 2010 Burton Operator snowboard? In other words, will Burton ship the board with an adapter plate?

  1. Anonymous says:

    Nope you will have to buy Burtons overpriced bindings. Welcome to the sell out company known as burton.

  1. Anonymous says:

    i believe that board has the channel, meaning that although u can get an adaptor kit to make them fit, it will be akwardly set up and hurt response and function from both board and binding. sell the board and get a normal non-burton one. or u have to get overpriced est bindings that cost $60 more than better non-burton bindings.

  1. Anonymous says:

    EWWWWWWWW BURTON = SUCK

  1. Anonymous says:

    I wonder if theirs a song about flow bindings? "Im a Flowin I'm a flowin on the mountain. Baby I be Flowin......I be Flowin so awesome...ummmm yea this is prolly why thier are no songs about it.......